Hey everyone,

It has been a busy week at the shop and I have been helping my parents redo their deck, which, with our weather taking a turn for the better leaves me wishing I were out on the trails more. I figured I would offer some advice on how to get your bike back up and running if you happen to have chain problems on the trail.

To begin… as unfortunate as it is… everyone will break or damage a chain at some point in time.  In the case of mountain riding, too much tension on a climb, or catching a log while in the big ring can damage the chain and result in breakage or a stiff link. Not to worry, as both concerns can be resolved.  For the roadie type… an over exerted chain resulting from a missed shift or shifting error can cause similar problems.

-Seen above is an example of a stiff link that can be found in a chain (this will cause shifting and riding difficulties).

Follow these steps and your problems will be solved.

1.) To this problem there is one simple solution… get your rig back up and running at the side of the road without losing too much time off your ride.

2.) In order to resolve this problem you will need the following tools:

-A decent chain tool
-A quick link connecter
-Some patience (the latter of the three being the most important!)

3.) When you have a chain concern, your best option (be it road or mountain) is to pause your ride and stop where you can suspend your bike in an upright position:
-using the surroundings available, i.e. a tree, bench, guardrail, etc.
(This allows work to be more easily performed on the bicycle as it is upright and will function similar as to when you are riding it! (try not to work on your bike upside down.)

4.) Next, using your Park CT-3 (seen above) or similar tool, remove the stiff link, or fabricate two female ends to prep the installation of a quick link. This will allow the fastest, no issue install.
It is easiest to make these adjustments when the chain is not highly tensioned, so shifting the chain into the smallest rings (front and rear) will make it easier to repair the bike.

-When fixing a stiff or broken link it is important to remove the damaged portion (even if it makes the chain too short). This will help to ensure tensile strength in the chain.

5.) Check your regular riding  gears to ensure it will not cause any shifting problems and that you have removed any other stiff links.

*Note* For fixing broken chains: you are best to use a powerlink when your chain is new, however, pushing the pin on a link is better when your chain is aged. On those weekend trips up to the trails it never hurts to bring an extra chain along… just in case you have one of those days!

Until next time, keep your chain stressed, but not your nerves!

Bryan!